Which plug adaptor do I need when travelling from Channel Islands to Philippines?

Search again

Summary

The table below summarises the plug types, voltage and frequency of electrical current in both Channel Islands and Philippines.

Channel IslandsPhilippines
Plug TypesC, GA, B, C
Voltage230V220V
Frequency of electrical current50Hz60Hz

Plug Adaptors

In Channel Islands there's more than one plug type in use.

What type of plug does your appliance have?

Your Appliance has Plug Type C

In Philippines there's more than one socket type in use. You may require more than one adaptor.

Socket Type C
(Channel Islands) to Plug Type A
(Philippines)

Socket Type C
(Channel Islands) to Plug Type B
(Philippines)

Philippines also uses Socket Type C, which is used in Channel Islands. If using an appliance that has a Type C Plug in the Type C Sockets of Philippines, you will not need an adaptor.

Your Appliance has Plug Type G

In Philippines there's more than one socket type in use. You may require more than one adaptor.

Socket Type G
(Channel Islands) to Plug Type A
(Philippines)

Socket Type G
(Channel Islands) to Plug Type B
(Philippines)

Socket Type G
(Channel Islands) to Plug Type C
(Philippines)

Considerations

Voltage

The voltages found in Channel Islands (230V) and Philippines (220V) are not exactly the same, but the difference is tolerable, so you should not need a transformer.

Frequency of Electrical Current

The frequency of electrical current found in Channel Islands (50Hz) differs to that found in Philippines (60Hz).

Most equipment is not affected by differences in frequencies. Some exceptions are:

  • Electric clocks: Some electric clocks use the frequency of electrical current to measure time. If the clock is designed for one frequency, but used with another, time shifts could be experienced.
  • Appliances using motors: If there is a motor load associated with an appliance, the frequency governs the speed in revolutions of the motor. This could mean that the motor will spin faster, or slower than intended and could have a detrimental effect in the appliance's operation. This is of particular concern in power tools and other machinery that uses motors, so if you must use these, you should seek access to a frequency converter.

Report an error