Which plug adaptor do I need when travelling from Czech Republic to St. Kitts and Nevis?

Summary

The table below summarises the plug types, voltage and frequency of electrical current in both Czech Republic and St. Kitts and Nevis.

	Czech Republic	St. Kitts and Nevis
Plug Types	E	D, G
Voltage	230V	230V
Frequency of electrical current	50Hz	60Hz

Czech Republic uses Plug Type E.

In St. Kitts and Nevis there's more than one socket type in use. You may require more than one adaptor.

Socket Type E
(Czech Republic) to Plug Type D
(St. Kitts and Nevis)

Socket Type E
(Czech Republic) to Plug Type G
(St. Kitts and Nevis)

The frequency of electrical current found in Czech Republic (50Hz) differs to that found in St. Kitts and Nevis (60Hz).

Most equipment is not affected by differences in frequencies. Some exceptions are:

Electric clocks: Some electric clocks use the frequency of electrical current to measure time. If the clock is designed for one frequency, but used with another, time shifts could be experienced.
Appliances using motors: If there is a motor load associated with an appliance, the frequency governs the speed in revolutions of the motor. This could mean that the motor will spin faster, or slower than intended and could have a detrimental effect in the appliance's operation. This is of particular concern in power tools and other machinery that uses motors, so if you must use these, you should seek access to a frequency converter.

The voltage found in Czech Republic and St. Kitts and Nevis is exactly the same (230V). You will not need a transformer.