The table below summarises the plug types, voltage and frequency of electrical current in both Ecuador and Monaco.
Ecuador | Monaco | |
---|---|---|
Plug Types | A, B | C, D, E, F |
Voltage | 120V, 127V | 127V, 220V |
Frequency of electrical current | 60Hz | 50Hz |
In Ecuador there's more than one plug type in use.
What type of plug does your appliance have?
In Monaco there's more than one socket type in use. You may require more than one adaptor.
Socket Type A
(Ecuador) to Plug Type C
(Monaco)
Socket Type A
(Ecuador) to Plug Type D
(Monaco)
Socket Type A
(Ecuador) to Plug Type E
(Monaco)
Socket Type A
(Ecuador) to Plug Type F
(Monaco)
In Monaco there's more than one socket type in use. You may require more than one adaptor.
Socket Type B
(Ecuador) to Plug Type C
(Monaco)
Socket Type B
(Ecuador) to Plug Type D
(Monaco)
Socket Type B
(Ecuador) to Plug Type E
(Monaco)
Socket Type B
(Ecuador) to Plug Type F
(Monaco)
The voltage, 120V, which is present in Ecuador, is significantly different to what's used in Monaco.
Some appliances are compatible with multiple voltages. To find out if your appliance is one of them, check the appliance label and/or instruction booklet. An example appliance label is below.
See examples of appliance labels
Is your appliance compatible with the voltages used in Monaco (127V and 220V)?
If your appliance is not compatible with multiple voltages, you will need a transformer to adjust the voltage input when using your appliance in Monaco.
The voltage, 120V, which is also present in Ecuador, is not exactly the same to what's used in Monaco, but the difference is tolerable, so you should not need a transformer when using sockets with this voltage. Be sure to carefully check the voltage before using your appliance in sockets in Monaco. You may need to ask a local resident, an electrician, or the local government to find out in situations when the power sockets are not labelled with their voltages.
The frequency of electrical current found in Ecuador (60Hz) differs to that found in Monaco (50Hz).
Most equipment is not affected by differences in frequencies. Some exceptions are: